|
Kenma |
|---|
Product Code: 0415390
Brand: VENHILL
TRIUMPH T140 THROTTLE CABLE ADJUSTER TO SUIT THE MAGURA SUPPLIED TWISTGRIP. 11mm A/F HEX WITH AN M10x1.00 THREAD. FITS ONTO F2B OR F35. MACHINED FROM 6061-T6 ALUMINIUM & CLEAR ANODISED.
Product Code: 0720288/1
Brand: VENHILL
Slotted adjuster for Magura 116940 clutch lever with slot. Length of threaded section 30mm. O.D. of large adjuster ring is 19mm. Adjuster hole to fit cable ferrule is 6mm I.D. STEEL ADJUSTER M7 X 1 ALUMINIUM NUT.
Product Code: 0720289/1
Brand: VENHILL
Slotted adjuster for Magura 116940 clutch lever with slot. Length of threaded section 30mm. Adjuster hole to fit cable ferrule is 8mm I.D. STEEL ADJUSTER M7 X 1 ALUMINIUM NUT.
Product Code: 511.02.590
Brand: VENHILL
M5x0.8 THREAD. 18mm THREAD LENGTH. 8mm O.D. KNURLED BODY. I.D. 6.45mm TO SUIT F2B OR F35. THROUGH HOLE I.D. 2.30mm, NOT SUITABLE FOR FITTING ONTO A COMPLETED CABLE UNLESS MODIFIED TO ALLOW CARB NIPPLE (EE7 OR EE5) TO PASS THROUGH. SUITABLE FOR DECOMPRESSOR LEVER 511.07 AS WELL AS MANY CARB TOPS....
Product Code: A10125/22
Brand: VENHILL
For use with lock ring LR10125. Length of threaded section 22mm. Fits F2B ferrule (LB1TS 5mm conduit) Fits F89 ferrule (LB2TS 6mm conduit)
Product Code: A10125/22/S
Brand: VENHILL
Fits 600A. M10 x 1.25mm thread. Slotted
Product Code: A26B
Brand: VENHILL
1/4 BSF x 32mm (1 1/4 ) (26TPI) THREAD. SUITABLE FOR 6mm DIA. FERRULE
Product Code: A31/137C
Brand: VENHILL
35mm adjuster thread length, 5/16 BSC thread
Product Code: A31/137U
Brand: VENHILL
Suitable for wire up to 3mm O.D. Use F101 ferrule for LB3TS FT4SN ferrule for T4NS conduit 6.48mm ID for cable ferrule 3.39mm ID for wire
Product Code: A6075/15
Brand: VENHILL
M6 x 0.75mm 15mm long threaded section. Use lock nut LN6075. Suitable for AMAL carburettors on Japanese bikes.
Product Code: A6100/20
Brand: VENHILL
M6 x 1.0 X 20mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE
Product Code: A6100/25
Brand: VENHILL
M6 x 1.0 X 25mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.
Product Code: A6100/32
Brand: VENHILL
M6 x 1.0 X 32mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.
Product Code: A61B
Brand: VENHILL
Ideally for LB2TS conduit, use F89 stepped ferrule on the adjuster stem end, and F89B standard ferrule (7mm) on the other end. It can also be used with LB3 using F101 stepped ferrrules, 2.9mm I.D. for wire inside.
Product Code: A675B
Brand: VENHILL
To be used with ferrule up to 6.5mm od on each end.
Product Code: A7100/16
Brand: VENHILL
STEEL ADJUSTER SCREW, M7x1.00 16mm LENGTH. FOR WIRE UP TO 2mm WITH A 6.5mm OPENING (8mm DEPTH) TO USE WITH F2B OR F35 FERRULES.
Product Code: A7324
Brand: VENHILL
Suitable for AMAL carburettors on British bikes. Use locknut LN7324
Product Code: A8100/17
Brand: VENHILL
I.D. for cable ferrule 7.14mm, 3.34mm I.D. for wire
Product Code: A8100C/15
Brand: VENHILL
M8x1.00 x 15mm THREAD. SUITABLE FOR A 8mm DIA. FERRULE ( F201 OR F100 )
Product Code: A8100C/25
Brand: VENHILL
M8x1.00 x 25mm THREAD. SUITABLE FOR A 8mm DIA. FERRULE ( F201 OR F100 )
Product Code: A8125/25
Brand: VENHILL
Hole size for ferrule: 6.6mm. Length of threaded section: 10mm
